What is Automation Egg Collection Machine Spare Parts Egg Collection Finger For Layer Chicken Cage?

The egg collection finger (often called a egg collection claw is a critical spare part in automated poultry layer farm automation egg collection machine. It is a flexible, soft-touch component—typically made of high-grade plastic—attached to the lift or elevator mechanism of auto egg collection machine. Its primary function is to gently grip, lift, and transfer eggs from the poultry cage egg convyeor belts to the central conveyor or packing table. By mimicking the gentleness of a human hand, it minimizes hairline cracks and breakage, which is vital for maintaining high commercial egg quality in automated layer farms.

In modern layer farm egg collection machine setups, the goal is to move thousands of eggs per hour without damage. The egg collection finger acts as the interface between the mechanical speed of the machine and the fragile shell of the egg.

• Function: It scoops or grips the egg from the longitudinal conveyor belt.

• Material: Usually made from UV-resistant nylon to ensure a "egg soft landing."

• Design: Curved to fit standard egg shapes, preventing them from rolling off during the vertical lift process.

A complete layer chicken fartm automation egg collection machine relies on several synchronized accessories. When sourcing spare parts, it is crucial to understand the components that work alongside the egg collection finger.

• Role: The primary lifting agent.

• Wear Signs: Cracking plastic, loss of elasticity, or deformation.

• Replacement: Should be replaced in sets to maintain consistent timing in the egg elevator system.

• Material: High-strength polypropylene (PP) or nylon.

• Features: High toughness but low elongation, reduce the egg-damaged rate,keeping eggs clean.

• Maintenance: Needs regular tensioning to prevent slippage which causes egg piling.

• Role: The heart of the system. A hollow worm gear reducer is often used for smooth, low-noise power transmission.

• Capacity: Typically ranges from 0.75KW to 2.2KW depending on the length of the chicken house.

• Role: Located at transfer points (e.g., from egg conveyor belt to elevator), these soft pads or brushes absorb the momentum of moving eggs to prevent impact damage.

Comparison: C-Type Egg Collection Finger vs. Vertical Egg Collection Finger

Pros:

• Reduced Breakage: Reduces broken egg rates to under 0.5% compared to manual egg collection.

• Hygiene: Plastic materials are easy to sanitize, reducing Salmonella risks.

• Efficiency: Enables a single egg collectio machine system to collect from 3-9 tiers of chicken cages simultaneously.

Cons:

• Wear & Tear: Nylon egg collection fingers degrade over time due to ammonia exposure in poultry houses.

• Compatibility: Must be matched exactly to the chain lift system (pitch and size) or jams will occur.

To ensure your layer farm egg collection machine spare parts last, follow this simple schedule:

1. Weekly: Wipe down egg collection fingers with a mild disinfectant to remove manure and feather dust. Hardened dirt makes the finger abrasive.

2. Monthly: Check the buckle chain gear and tension of the lifting chain. Loose chains cause the egg collection fingers to misalign with the egg conveyor belt.

3. Quarterly: Inspect nylon gears and drive shafts for "play." Any vibration in the drive system transfers to the egg collection fingers, causing cracked eggs.

Expert Tip: Keep an inventory of at least 50 spare parts egg collection fingers and 2-3 meters of egg collection belt. These are high-wear items, and a failure can halt your entire layer farm egg production line.